look mom, no cloud
  1. Home
  2. Robot vacuums
  3. Dreame

Does the Dreame L10s Pro Ultra Heat work without internet?

Still checking this one. 4 of 7 criteria ticked so far for the Dreame L10s Pro Ultra Heat. Good news already: Valetudo runs on it, and with that on board it would be fully local.

Verdict · as sold

Unverified

Not checked enough to say yet. What is known is shown, with sources.

Flashable. Put Valetudo on it and it becomes fully local. Details below.

Checked
4/7 checked
Brand
Dreame · CN
Model
L10s Pro Ultra Heat
Home Assistant
dreame_vacuum · vendor cloud: once, at setup
Track record
Not reviewed yet

Seven questions, as sold.

4 of 7 checked. Every yes or no links to its source and the date it was checked. Nothing here assumes a flash: that’s the next section.

  1. Works with the internet cut 01 · Not checked

    Does the main function survive with the WAN cable pulled?

  2. No vendor account needed 02 · No

    Can it be set up without creating an account with the manufacturer?

    Dreame's app guide: "Once installed, register and log in to your account" before network setup.

    source: support.dreametech.com verified 2026-09-22 vendor documentation
  3. Documented local API 03 · Yes

    Is there a publicly documented local protocol: HTTP, MQTT, ONVIF, RTSP, Zigbee, Z-Wave, Matter, Modbus?

    Tasshack's integration lists the L10s Pro Ultra Heat (dreame.vacuum.r2338a / r2377 / r2338h) and its "Local" mode drives the robot with IP and token over the miIO/MIoT protocol.

    source: raw.githubusercontent.com verified 2026-09-22 vendor documentation
  4. Can be firewalled off for good 04 · Not checked

    Can it be cut off from the internet permanently without anything breaking?

  5. Firmware updates without the cloud 05 · No

    Can it be updated by hand, with no forced auto-update?

    Dreame: "A stable internet connection is crucial for a successful firmware upgrade"; updates come only through the app, and auto-update is an opt-in toggle.

    source: support.dreametech.com verified 2026-09-22 vendor documentation
  6. Runs alternative firmware 06 · Yes

    Can it run ESPHome, Tasmota, OpenBeken, Valetudo or OpenIPC?

    Listed as supported by Valetudo.

    source: valetudo.cloud verified 2026-09-21 vendor documentation
  7. Home Assistant talks to it locally 07 · Not checked

    Is the Home Assistant integration local_push or local_polling?

Already own one? Into Home Assistant, then.

A different question from the verdict. Home Assistant can talk to a device locally and still need Dreame’s servers to get started, or for good. This is what the integration itself needs.

Yes, with one catch. You log in to Dreame once to get the local key. After that Home Assistant talks to the Dreame L10s Pro Ultra Heat directly, and the vendor's servers can go.

Route
Custom integration, via HACS
Integration
dreame_vacuum
Vendor cloud
Once, at setup
Verified
2026-09-22

No core integration. The Tasshack HACS component offers a "Local" mode that takes only the robot's IP and its 32-character token, which you extract from the Mi Home / Dreamehome account it was paired with; its config flow states the map feature requires a cloud connection.

How to set it up → source: raw.githubusercontent.com

The way out: new firmware.

What flashing gets you, and what it costs. The guide is the community’s own and is linked here so it stays current.

Firmware
Valetudo
Method
fastboot
Afterwards
Fully local
Verified
2026-09-21

Rooting voids the warranty and can brick the robot. Valetudo documents the procedure per model and keeps it current. Valetudo flags docking, Wi-Fi and negative-device-ID quirks on newer units.

Flashing voids the warranty and can brick the device. Read the whole guide before starting.

Open the community guide →

Question 08 · the company

Dreame’s track record.

Nothing on record. That isn’t a clean bill yet: it takes a proper look through the vendor’s changelog, and that hasn’t been done for Dreame. No documented removal found. Dreame has added secure-boot gates and silent PCB revisions that block rooting on newer units; that is hardening against modification, not withdrawing local control from hardware already sold. No source establishes continuous availability either, so unknown.

Editor’s note

In plain words.

A flagship dock robot that Valetudo can root over fastboot, which is the whole reason it is here. As sold, pairing needs a Dreame account and firmware only arrives through the app. A local protocol exists and Home Assistant can drive it over the LAN once you have the token, but nobody documents what the robot does if Dreame's servers vanish for good.

Wrong? Probably somewhere.

Say where. A link and a sentence is enough. Every claim above carries its source so it can be checked.

Correct this entry → Edit the file